|
FastVision provides two frame
grabbers for cameras interfacing via Camera Link. The low speed version
is called Fast-64 which has two basic or one medium Camera Link to provide
interfacing to the FastCamera series
click to enlarge
- Half length PCI board with no or one TriMedia processor with 64 MB of dedicated high speed (572MB/s) SDRAM, capable of over 720 MFLOPS of computational power
- Three 85 MHz Camera Link (Channel Link) inputs
- Programmable FPGA's for
I/O interface configuration
- 64-256MB SDRAM frame buffer memory
- 64/32 bit external PCI bus
- Supported by standard software development tools, including fully optimized microcoded signal and image processing libraries (FOIL)
- Optional Nexperia (TriMedia) software development environment (SDE) for Windows® 9X/NT/2K and Solaris™ and Linux
| Camera Control |
| Serial port |
Asynchronous RS-232, 600-19,200 Baud |
| Frame/line start outputs |
2 RS-422 |
| Exposure control out. |
2 RS-422 |
| Master clock out. |
2 RS-422 programmable in 0.07 Hz steps up to 40 MHz |
| General purpose out. |
4 RS-422 |
| Pixel clock inputs |
2 RS-422 |
| Line/frame valid in. |
4 RS-422 |
| External trigger in. |
2 RS-422 |
| Gen. purpose in. |
4 RS-422 |
| Power |
No camera power provided by card; use an external supply |
| RS-422 input |
RS-422, LVDS signaling |
| PCI Interface |
| Clock rate |
33 MHz max. |
| Data width |
64/32 bits |
| Peak DMA rate |
256/132 MB/sec. |
| Standards compliance |
PCI Rev. 2.1 |
| PMC Interface |
| Clock rate |
33 MHz max. |
| Data width |
32 bits |
| Peak DMA rate |
132 MB/sec. |
| Standards compliance |
PCI Rev. 2.1 |
The Philips PNX1302 Processor
The Philips developed PNX1302 is a high-performance programmable single-chip processor that delivers real-time processing of audio, video, graphics, and communications datastreams. The Nexperia (TriMedia) PNX1302 employs a typical Very Long Instruction Word (VLIW) architecture capable of 720 MFLOPS/900 MIPS peak and has a 32-bit CPU that connects instruction and data caches at rates of 4 GB/sec and 1100MB/sec peak. By incorporating the Philips Nexperia processor into the Fast-64, customers and developers can significantly increase their processing power enabling them to work more efficiently and cost effectively.
click to enlarge
Click here
to Download DataSheet or here
to Register to Download Manuals
To
Top of Page |
